Symptoms
-
Connecting WiFi and Bluetooth dongles to CX400
Procedure
Wifi
Connecting the Wi-Fi dongle to CX400
- While the phone is in idle state, insert the Wi-Fi USB Dongle into the USB port on the back of the phone.
The LCD screen will prompt Wi-Fi adapter is added, scanning available wireless networks right now?
- Press the OK softkey. The device will scan for available Wi-Fi networks.
- Use the menu arrow keys to select Available Networks. Press the Enter softkey
- Select the desired Wi-Fi network and press the Connect softkey
- Enter the Wi-Fi network password and press the OK softkey
Once connected, a green check mark will appear next to the selected Wi-Fi network
Bluetooth
Connecting Bluetooth Dongle to CX400
- While the phone is in idle state, insert the Bluetooth USB Dongle into the USB port on the back of the phone.
The LCD screen will prompt Bluetooth adapter is added, scanning Bluetooth devices right now?
- By default, Bluetooth is Off. Press the Switch softkey to set to On.
- Once Bluetooth is On, press the Save softkey.
- Press the Scan softkey to scan for available Bluetooth devices.
- Use the menu keys to highlight the desired Bluetooth device and press the Connect softkey.
Once connected, a green check mark will be displayed next to the selected Bluetooth device
Escalation Information
Escalation Information: SD1
If you need additional assistance, contact Crexendo Support at 855-211-2255 or email us at support@crexendo.com
Change Log
| Date | Description |
|---|---|
| Jun 9, 2026 | Article migrated and revamped |