Yealink Overrides - Network Settings

="

Connect Devices to WiFi:

static.wifi.enable="1"
static.wifi.1.ssid="MyWiFi"
static.wifi.1.label="MyWiFi"
static.wifi.1.security_mode=:"WPA2-PSK"
static.wifi.1.password="Thisisareallybadpassword"

Static IP Address to Device:

network.internet_port.type ="2"
network.internet_port.ip ="PRIVATE IP ADDRESS (192.168.X.X)"
network.internet_port.mask ="Subnet Mask (255.255.X.X)"
network.internet_port.gateway ="PRIVATE IP GATEWAY (192.168.X.X)"

Static DNS Servers:
Some users may need to configure static DNS on their devices. 
(Crexendo VIP automatically assigns 8.8.8.8 as static DNS in device configuration files)

static.network.static_dns_enable="1"
static.network.primary_dns="X.X.X.X"
static.network.secondary_dns="X.X.X.X"

Enable LLDP:

static.network.lldp.enable="1"

Enable VLAN:

static.network.vlan.internet_port_enable="1"
static.network.vlan.internet_port_vid="VLAN ID NUMBER"
static.network.vlan.internet_port_priority="1-7" (Smaller Number equals higher priority)
static.network.vlan.dhcp_enable="1"
static.network.vlan.dhcp_option="1-255"


static.network.vlan.pc_port_enable="1"
static.network.vlan.pc_port_vid="VLAN ID NUMBER"
static.network.vlan.pc_port_priority="1-7"(Smaller Number equals higher priority)
static.network.vlan.dhcp_enable="1"
static.network.vlan.dhcp_option="1-255"

802.1x Configurations:

network.802_1x.mode="Value"

Values:
1 - EAP-MD5
2 - EAP-TLS
3 - EAP-PEAP/MSCHAPv2
4 - EAP-TTLS/EAP-MSCHAPv2
5 - EAP-PEAP/GTC
6 - EAP-TTLS/EAP-GTC
7 - EAP-FAST

SNMP

network.snmp.enable="1"
network.snmp.port="1-65535"
network.snmp.trust_ip="URL or IP Address"